Effects of three types of modified atmospheric packaging on the physicochemical properties of selected glutinous rice

The effect of modified atmospheric packaging (MAP) on the physicochemical properties of selected glutinous (Thadokkham-8 and Thadokkham-11) rice was studied and compared with a non-glutinous rice (Doongara). The freshly harvested/milled grains were packed in four different MAP conditions viz. control, vacuum, CO₂ and N₂ for 12 months at room temperature (23 ± 1 °C). Gas (N₂ or CO₂) was flushed in aluminum bags at the pressure of 300 kPa for 3 s and subsequently hermetically sealed. Vacuum packaging was done at −100 kPa. Results showed that ageing induced changes in the starch granules were less prominent in vacuum and/or MAP samples using CO₂ or N₂. Surface analysis showed that control storage significantly reduced the percentage of lipids and increased the percentage of proteins on the surface in all selected varieties. N₂ and CO₂ storage of TDK8 and DG slowed down the shift of properties of macromolecules and maintained the surface starch/proteins/lipids ratios during 6 months of storage. Moreover, the grains stored in vacuum maintained the lipids with lower proportion of proteins exposed to the surface after cooking. N₂ and CO₂ induced increase in pasting temperature but significant reduction in final viscosity when compared to control. The findings correlated well with thermal analysis. The in situ Thermal Mechanical Compression Test (TMCT) device cooking and texture analysis revealed that modified storage slightly slowed the ageing induced changes in the cooking quality and stickiness of glutinous rice. Among all storage conditions used vacuum was relatively the best to maintain the quality of the grain.     

Anderson Acceleration for Nonconvex ADMM Based on Douglas-Rachford Splitting

The alternating direction multiplier method (ADMM) is widely used in computer graphics for solving optimization problems that can be nonsmooth and nonconvex. It converges quickly to an approximate solution, but can take a long time to converge to a solution of high-accuracy. Previously, Anderson acceleration has been applied to ADMM, by treating it as a fixed-point iteration for the concatenation of the dual variables and a subset of the primal variables. In this paper, we note that the equivalence between ADMM and Douglas-Rachford splitting reveals that ADMM is in fact a fixed-point iteration in a lower-dimensional space. By applying Anderson acceleration to such lower-dimensional fixed-point iteration, we obtain a more effective approach for accelerating ADMM. We analyze the convergence of the proposed acceleration method on nonconvex problems, and verify its effectiveness on a variety of computer graphics including geometry processing and physical simulation.     

Sustainability assessment of Iranian petrochemical companies in stock exchange: A data envelopment analysis-based approach

The assessment of efficiency is always of particular importance according to different indicators from different perspectives. There are various techniques for evaluating petrochemical companies, among which the data envelopment analysis technique is one of the best techniques that can be used to calculate the relative efficiency of a set of decision-making units with network structures. In the present paper, seven petrochemical companies listed in the Iranian stock exchange were analysed. These companies were evaluated in terms of financial performance and sustainable development, and their relative efficiency was calculated during 2015–2016. According to the obtained results, only Marun Petrochemical Co. was found to be efficient in all areas and years. The results also showed that four companies were efficient in financial terms over the period under study. In the general conclusion regarding the companies' performance, Marun was ranked first, Jam was ranked second, and Zagros was ranked third.     

Optimal inspection for randomly triggered hidden deterioration processes

This paper deals with degradation processes whose onset is triggered at a random time and which stay hidden until they are discovered through inspection or when they begin to show symptoms. This is applicable in many healthcare and industrial scenarios, for example, in the modeling of breast cancer or termite infestation. In our model, we assume that symptoms appear after hitting a random critical threshold and that inspections may have a sensitivity less than one as well as a nonzero false positive rate. The expected cost of repair is derived, and the inspection rate is optimized for a cycle (which lasts from degradation-free to repaired state). This gives results for three cases: the first is for a finite observation period with no degradation recurrence, the second for infinite time horizon allowing recurrence. In the third case, we derive an upper bound for the expected cost in a given constant time period. Finally, the model is applied to determine the optimal strategy for breast cancer screening with regard to the effects of different parametrizations.     

基于趋势分析的舰载机预防性维修工作优化技术研究

针对缩减舰上保障规模和提高舰载机的完好率的需求，提出舰载机预防性维修工作优化方法。分析了如何选取优化项目和参数，对比分析了各种趋势分析方法的适用性，采用基于飞参数据的趋势分析方法，刻画系统或部件的性能变化趋势，提供适合单机的舰载机预防性维修工作优化决策支撑，并以典型系统进行了案例应用，形成了一种新的舰载机提高保障效能、提升系统安全性水平的技术途径。     

PVC地板行业研究现状及发展趋势

概述了国内外PVC地板行业的生产及应用现状,比较了几种地板材料的优缺点,介绍了PVC地板生产技术的研究进展情况,分析了国内PVC地板行业的发展趋势。     

A simplified physically-based breach model for a high concrete-faced rockfill dam: A case study

A simplified physically-based model was developed to simulate the breaching process of the Gouhou concrete-faced rockfill dam (CFRD), which is the only breach case of a high CFRD in the world. Considering the dam height, a hydraulic method was chosen to simulate the initial scour position on the downstream slope, with the steepening of the downstream slope taken into account; a headcut erosion formula was adopted to simulate the backward erosion as well. The moment equilibrium method was utilized to calculate the ultimate length of a concrete slab under its self-weight and water loads. The calculated results of the Gouhou CFRD breach case show that the proposed model provides reasonable peak breach flow, final breach width, and failure time, with relative errors less than 15% as compared with the measured data. Sensitivity studies show that the outputs of the proposed model are more or less sensitive to different parameters. Three typical parametric models were compared with the proposed model, and the comparison demonstrates that the proposed physically-based breach model performs better and provides more detailed results than the parametric models.     

Creative clusters in the regeneration of Valletta and the cultural politics of Strait Street

The paper aims to unfold the narrative of development in a creative cluster project for the regeneration of Strait Street in Valletta, Malta. This is approached by first examining the distinctive, historically contentious background of the neighbourhood and, thereafter, unpacking the development narrative of policy documents and the discursive and material constructs about the creative city approach to regeneration strategies in the city. Using a ‘system-wide’ analytical framework, this material is then scrutinized to gain an understanding of the specificities involved and, finally, discuss the crucial features of the key dimensions elucidating the potential strengths and weaknesses of the case     

大规模多状态计算系统的容错性能分析

针对异构计算节点组成的大规模多状态计算系统的容错性能分析问题，提出了一种计算系统容错性能的评估方法。该方法采用自定义的两级容错性能形式化描述框架进行系统描述，通过构造多值决策图（Multi-value Decision Diagram，MDD）模型对系统进行容错性能建模，并基于构造的模型高效地计算出部件故障的条件下计算系统在特定性能水平上运行的概率，减少了计算的冗余性。实验结果表明，该方法在模型的大小和构建时间上均优于传统方法。该方法的提出将对系统操作员或程序设计者具有重要意义，使其确保系统适合预期应用。     

Empirical surveys of frontier applications: a meta‐review

This contribution is the first attempt to systematically review all empirical surveys that so far have been made available in the broad field of efficiency and productivity analysis using frontier estimation methodologies. We provide a systematic bibliometric review on the many empirical surveys in the field of efficiency and productivity analysis, the most relevant concepts, areas, overlaps, and potentials to explore from its introduction to the most recent surveys. We combine the United Nations’ International Standard Industrial Classification (ISIC) taxonomy for the economic activity with the Journal of Economic Literature (JEL) classification system to classify the empirical surveys and to identify the current gaps in the literature. In addition to the most relevant/generic potential areas for applications (according to the United Nation's ISIC), this methodology provides a cluster analysis with the most relevant concepts that have been considered so far (according to the JEL codes). This overview brings an interesting guide for future work to develop the whole field.